IC694ALG442 GE Analog Combination Module Current/Voltage 4 Inputs 2
Outputs.
⇒ Click here for good price IC694ALG442
| Brand/Manufacturer | GE/USA |
| Part Number | IC694ALG442 |
| Alternate Part Number | IC694ALG442 |
| Description | MOTOR SERVO |
| Dimennsions | 3.5x13.2x13.5cm |
| Weight | 0.28kg |
Contact Us
Email: miya@mvme.cn (CLICK)
QQ: 2851195450
Tel: 86-18020776792(CLICK)
Skype:miyazheng520(CLICK)
Product Details
The GE Fanuc IC694ALG442 is an Analog Combination Current/Voltage
Input/Output Module for Rx3i PacSystems. This module provides four
distinct input channels and two single-ended output channels. Each
channel can be configured using Machine Edition software in any of
the following ranges: (0 to +10) unipolar, (-10 to +10 volts)
bipolar, 0 to 20 mA, or 4 to 20 mA. The 0 to +10 unipolar range is
the default setting for the system and will be automatic upon
installation unless altered. In a higher mode, the input channels
can be configured for a 4 to 20 mA range. The IC694ALG442 can be
used in any I/O slot within the Rx3i system.
Various outputs can be configured. A Hold Last State is possible if
the system power is interrupted or can be reset to the low end of
the given series. Outputs may also be configured to run in ramp
mode on command from the applicable program. Additionally, low and
high alarm ranges can be set for all input channels with an open
wire fault relayed to the CPU for each output channel.
This IC694ALG442 module must be attached to a 24 VDC power from an
outside source for proper use. If used with the RX3i Universal
Backplane, the external source can be attached through the TB1
connector located on the left hand side of the backplane. Another
option is available through a direct connection on the module’s
terminal block. If using the backplane, the external source must be
connected to the terminal block. Resolution per bit is based on the
configured input or the output range. If the current source is
reversed into input, or if it is below the low end of the current
range, the module inputs a data word equivalent to the low end of
the range. Resolution of the translated signal is 12 binary bits
from the A/D converter in the %AI. Each channel is capable of 15 to
16 bit converting.
As a bonus feature, IC694ALG442 can respond directly to specific
COMMREQ commands from the application program for certain tasks,
such as removing the error code, amending input alarm limits, and
putting one or both outputs into ramp mode.
Our advantages
1) TRICONEX(3008,3625,3805E.3721,3700A 4351B...)
2) BENTLY NEVADA(3500/42M ,3500/22M,3500/95.3500/05...)
3) HIMA(F3330,F3236 ,F6217,F7126,F8621A....)
4) FOXBORO(FBM203,FBM204,FBM217,FMB231...)
5) Allan-Bradley (1756,1785,1771,1746,1769..)
6) ABB (DSQC .....)
7) GE(IC693,IC697,IC695,IS200,DS200)
8) BACHMANN(CM202,DI232,MPC240,NT255,AIO288...)
9) ICS (T8403,T8431...)
More Products
| GE | HE693RTD600 | GE | IC695PBM300-CC |
| GE | IC697CGR772 | GE | 531X139APMARM7 F31X139APMA |
| GE | IC693CMM321 | GE | 531X139APMARM7 |
| GE | IC694MDL742 | GE | IC200EBI001 |
| GE | IC697MDL653 | GE | IC693MDL231 |
| GE | IC697MDL740 | GE | IC697PWR711K |
| GE | IC200ALG630-EC | GE | DS200SLCCG1AEG DS215SLCCG1AZZ01B |
| GE | IC697RCM711 | GE | IC690ACC901 |
| GE | IC698PSA350 | GE | IC693ALG391 |
| GE | IC693CMM302 | GE | IC660BRD025 IC660ERD025 IC660TBD025 |
