IC693CPU364-CJ GE CPU Module
⇒ Click here for good price IC693CPU364-CJ
| Brand/Manufacturer | GE /USA |
| Part Number | IC693CPU364-CJ |
| Alternate Part Number | IC693CPU364-CJ |
| Description | MOTOR SERVO |
| Dimennsions | 15.2 cm x 15.2 cm x 5.1 cm |
| Weight | 0.4kg |
Contact Us
Email: miya@mvme.cn (KLICK)
QQ: 2851195450
Tel: 86-18020776792(KLICK)
Skype:miyazheng520(KLICK)
Product Details
The IC693CPU364 is a single-slot Central Processing Unit (from the
GE Fanuc Series 90-30) with an embedded Ethernet cord and 1
built-in serial port. This unit is the "brains" of the PLC and is
where most of the calculations take place. See specifications for
this unit on IC693CPU364's website page. A standard application for
IC693CPU364 would be connecting a computer's 9-pin serial port via
IC693CBL316 to IC693CPU364's standard Ethernet interface. It should
be noted that IC693CPU364's Ethernet interface is Ethernet Global
Data (EGD). The benefit of this built in Ethernet interface is that
you do not need to use a separate Ethernet module such as CMM321
with the unit. You can, in fact, save a PLC slot based on the built
in nature of an Ethernet port on IC693CPU364.
The EGD also allows CPU364 to handle specialized parameters which
HHP's configuration mode is not able to do. Unlike CMM321, CPU364
does not require an external transceiver. CPU364 has a built in
transceiver that can be connected to via the 10BASE-T port. CPU364
does offer some added functionality in the ability to add an
external transceiver as well though. This can be done via the AAUI
port which bypasses the internal transceiver. Another benefit of
the built in Ethernet interface is that it can communicate without
using the PLC backplane, creating faster communications speed than
could be achieved with separate CPU and Ethernet modules. Some
basic things to note regarding IC693CPU364 are that when using
CPU364 you must connect to frame ground at the slot where it is
installed. You can find a grounding wire on the unit for this very
use.
CPU364 uses flash firmware standard with no EPROM, and no EEPROM.
The current rating on IC693CPU364 is 1A and it uses GE Fanuc Fuse
44A725214–001. The maximum CPU capacity for CPU364 is 25 MHz
utilizing the 80386EX processor. There are 2048 input points, 2048
output points. Register memory is configurable from 128 to 32640
words. CPU364 has firmware-based floating point math.
Main Products
The advantage brands and series of our company are as follows:
【Honeywell】Module DCS / PLC
【Emerson / Delta V】Module
【ABB】Input Output Module
【AB】Module / Touch Screen
【GE/Fanuc】IC69 Series PLC
【Bently Nevada】3500 system
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
If you need detailed technical information, welcome to contact us.
More Products
| GE | UR 9NH UR9NH CPUUR | GE | IC693ACC302A |
| GE | IC694CHS392 | GE | IC693ALG442B |
| GE | IC693CBL300 | GE | IC693ALG442 |
| GE | IC200MDL940 | GE | ME95MBP001 |
| GE | IC697MDL750 | GE | IC693ACC310 |
| GE | HE693THM884 | GE | IC660BBD020 |
| GE | 531X307LTBAJG1 | GE | IC660BBD024 |
| GE | IC200CHS002 | GE | UR1HH |
| GE | IS200VSVOH1B | GE | IC697PWR724 |
| GE | IS200VSVOH1BDC IS200VSVOH1B | GE | IS420ESWBH1A |
