IC660BBD021 GE Block - Sink I/O 16 Circuits
⇒ Click here for good price IC660BBD021
| Brand/Manufacturer | GE /USA |
| Part Number | IC660BBD021 |
| Alternate Part Number | IC660BBD021 |
| Description | MOTOR SERVO |
| Dimennsions | 7.6 cm x 20.3 cm x 10.2 cm |
| Weight | 1.8kg |
Contact Us
Email: miya@mvme.cn (KLICK)
QQ: 2851195450
Tel: 86-18020776792(KLICK)
Skype:miyazheng520(KLICK)
Product Details
The IC660BBD021 is a 24/48 VDC Sink I/O, 16 Circuit, 3 Wire Sensor
Compatible Block of GE Fanuc series 90-30 PLCs. It interfaces
electromechanical and 3-wire solid sensors. The type of power
source this block receives is 24/48 VDC and is provided from field
output devices. The block has 16 discrete circuits that can work as
inputs, tristate inputs, or outputs. The circuits are powered by
the block with no additional supply. The IC660BBD021 has many
configurable parameters, including output pulse test, configurable
input filter time, output power up defaults, and output hold last
state or default. The block is equipped with electronic short
circuit and over temperature protection. It can detect a failed
switch, open wire in tristate inputs, overload, or no load. Also,
protective mechanisms prevent any damage due to overload by
shutting down the system.
The block should be installed in a protective case in a place with
no airborne contaminants and with adequate cooling and air flow.
IC660BBD021 needs a grounding system. The 16 circuits of the block
use terminals 6 to 21. Those terminals can work as inputs or
outputs. Outputs connect to DC- and inputs to DC+ with no need of
logic inversion. Using a terminal as a tristate input requires one
resistor mounted at the dry contacts of the input device. This
ensures open wire diagnostic availability.
When a user decides to disconnect block power, circuit power must
be disconnected as well. If power is applied to field terminals,
touching the pins is very dangerous and can cause electrical shock.
To replace an electronics assembly, a handheld monitor should first
be connected. The user must monitor the circuits from the HMM menu
and then turn it off and disconnect. The user can now power down
the block, remove the electronics assembly, and install the new
one. Terminals can be used as inputs or outputs using the + or –
side of the terminal board.
Our advantages
1) TRICONEX(3008,3625,3805E.3721,3700A 4351B...)
2) BENTLY NEVADA(3500/42M ,3500/22M,3500/95.3500/05...)
3) HIMA(F3330,F3236 ,F6217,F7126,F8621A....)
4) FOXBORO(FBM203,FBM204,FBM217,FMB231...)
5) Allan-Bradley (1756,1785,1771,1746,1769..)
6) ABB (DSQC .....)
7) GE(IC693,IC697,IC695,IS200,DS200)
8) BACHMANN(CM202,DI232,MPC240,NT255,AIO288...)
9) ICS (T8403,T8431...)
More Products
| GE | UR 9NH UR9NH CPUUR | GE | IC693ACC302A |
| GE | IC694CHS392 | GE | IC693ALG442B |
| GE | IC693CBL300 | GE | IC693ALG442 |
| GE | IC200MDL940 | GE | ME95MBP001 |
| GE | IC697MDL750 | GE | IC693ACC310 |
| GE | HE693THM884 | GE | IC660BBD020 |
| GE | 531X307LTBAJG1 | GE | IC660BBD024 |
| GE | IC200CHS002 | GE | UR1HH |
| GE | IS200VSVOH1B | GE | IC697PWR724 |
| GE | IS200VSVOH1BDC IS200VSVOH1B | GE | IS420ESWBH1A |
