IC693PWR321T GE Power Supply
⇒ Click here for good price IC693PWR321T
| Brand/Manufacturer | GE /USA |
| Part Number | IC693PWR321T |
| Alternate Part Number | IC693PWR321T |
| Description | MOTOR SERVO |
| Dimennsions | 3.6x13x13.5cm |
| Weight | 0.34kg |
Contact Us
Email: miya@mvme.cn (KLICK)
QQ: 2851195450
Tel: 86-18020776792(KLICK)
Skype:miyazheng520(KLICK)
PRODUCT DETAILS
The GE Fanuc IC693PWR321 module is a power supply module from the
90-30 Series of output replay modules. It powers the processing
capabilities of the Fanuc Series 90-30 PLCs. It is located in the
leftmost slot of the baseplate. It comes with a power rating of 30
Watts. It can work with both AC and DC power supplies. The input
voltage source of the device must have voltage ranges between 85
and 264 Volts AC or 100 and 300 Volts DC. It provides 3 different
voltage outputs: 5 Volts DC, 24 Volts DC voltage that provides
power to circuits, and an isolated 24 Volts DC voltage supply that
is used by some modules to provide external power. it has an inrush
current of 4 Amps peak, with 250 milliseconds maximum. This
programmable controller power supply device has a robust build and
it is equipped with a battery.
The IC693PWR321 module is fully compatible with any CPU model. The
power supply module is certified by the cULus and CE standards. It
has been designed to work in a Class 1 Division 2 rated
environment. The IC693PWR321 module comes with power supply
limiting feature that protects the hardware immediately when there
is a direct short. The power supply unit is equipped with 6
terminals for operator connections. It comes with an enhanced
diagnostics feature that tracks all events and updates for the
operators. A smart switch fusing is built inside the power supply
device as a protection measure. For communication, the IC693PWR321
module is equipped with an RS-485 serial port. The serial port can
be used to connect to different peripheral devices and a
CPU/computer.
Moore News
NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main
methods for industrial production of alumina.
Most of the alumina produced is produced by Bayer process.
The Bayer-sintering hybrid method was first created, which greatly
improved the total recovery of alumina.
With the continuous improvement of production technology, some new
production methods such as lime Bayer method and beneficiation
Bayer method are continuously applied to production.
The integrated process control system is a distributed control
system.
The system consists of eight process control subsystems (workshop)
for raw material grinding, lime digestion, dissolution,
sedimentation, seed filtration, evaporation, product filtration,
and roasting.
Each workshop has an engineering station EWS and 2-3 operator
stations OPS.
The data collection, real-time monitoring, data processing and
other information transmission of the internal process parameters
of the workshop are realized by the EtherNet/IP control network.
The main production operations of the entire alumina plant are
completed by these eight subsystems, each controlled by a
ControlLogix controller.
More Products
| GE | IC697MDL940 | GE | IC200CPU001 |
| GE | IC693PWR330 | GE | IC200MDL750 |
| GE | IC693PWR321 | GE | IC200MDD844 |
| GE | IC693MDL940 | GE | VMICPCI-7326 |
| GE | IC697ALG230 | GE | IC695CPE310 |
| GE | IC695CPU310 | GE | PQMII-T20-C-A |
| GE | IC200ALG326 | GE | IC693CPU363 |
| GE | IC200MDL650 | GE | IC693CPU372 |
| GE | IC200ALG264 | GE | IC695CRU320 |
| GE | IC200PWR002 | GE | IC695NIU001 |
