HE693THM884 GE 8 ch. J, K, N, T, E, R, S, B, C 0.1degC res., degC/F
units, 8 temp + ope n circ. alarms
⇒ Click here for good price HE693THM884
| Brand/Manufacturer | GE /USA |
| Part Number | HE693THM884 |
| Alternate Part Number | HE693THM884 |
| Description | MOTOR SERVO |
| Dimennsions | 3.6x13x13.5cm |
| Weight | 0.34kg |
PRODUCT DETAILS
The HE693THM884 allows thermocouple temperature sensors to be
connected to the PLC directly without the use of external signal
processing such as transducers, transmitters, etc. All analog and
digital processing of the thermocouple signal is performed on the
module. This high-resolution module (0.1°C), can report values to
the PLC I/O table in 0.5°C, 0.5°F, 0.1°C, or 0.1°F increments. The
module has eight thermocouple channels assigned to 8 %AI input
registers. There are 16 %I Alarm Bits, one open circuit alarm and
one setpoint alarm for each channel. Alarm setpoints are set for
each channel through 8 %AQ registers. Open circuit alarm bits for
each channel correspond to the first eight successive%I bits, and
the alarm setpoints for each channel correspond to the second eight
successive %I bits.
Moore News
NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main
methods for industrial production of alumina.
Most of the alumina produced is produced by Bayer process.
The Bayer-sintering hybrid method was first created, which greatly
improved the total recovery of alumina.
With the continuous improvement of production technology, some new
production methods such as lime Bayer method and beneficiation
Bayer method are continuously applied to production.
The integrated process control system is a distributed control
system.
The system consists of eight process control subsystems (workshop)
for raw material grinding, lime digestion, dissolution,
sedimentation, seed filtration, evaporation, product filtration,
and roasting.
Each workshop has an engineering station EWS and 2-3 operator
stations OPS.
The data collection, real-time monitoring, data processing and
other information transmission of the internal process parameters
of the workshop are realized by the EtherNet/IP control network.
The main production operations of the entire alumina plant are
completed by these eight subsystems, each controlled by a
ControlLogix controller.
More Products
| GE | IC697MDL940 | GE | IC200CPU001 |
| GE | IC693PWR330 | GE | IC200MDL750 |
| GE | IC693PWR321 | GE | IC200MDD844 |
| GE | IC693MDL940 | GE | VMICPCI-7326 |
| GE | IC697ALG230 | GE | IC695CPE310 |
| GE | IC695CPU310 | GE | PQMII-T20-C-A |
| GE | IC200ALG326 | GE | IC693CPU363 |
| GE | IC200MDL650 | GE | IC693CPU372 |
| GE | IC200ALG264 | GE | IC695CRU320 |
| GE | IC200PWR002 | GE | IC695NIU001 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
