IC697PWR724 GE Power Supply, 24 Vdc, 90 Watts
⇒ Click here for good price IC697PWR724
| Brand/Manufacturer | GE /USA |
| Part Number | IC697PWR724 |
| Alternate Part Number | IC697PWR724 |
| Description | MOTOR SERVO |
| Dimennsions | 6.5x21.8x29.2cm |
| Weight | 1.48KG |
PRODUCT DETAILS
The IC697PWR724 is a 90 Watt, 24 VDC Power Supply Module (PSA) in
the GE Fanuc 90-70 Series. Highlights include operation from 24 VDC
and three output voltage options for a total of 90 watts (+5 VDC
output up to 18 amps; +12 VDC output up to 1.5 amps; and -12 VDC
output up to 1 amp). The module features easy slide-in rack mount
construction, electronic short circuit overcurrent protection
provided on a 5 volt bus, and two rack operation from a single
power supply.
The PSA mounts on the rack and plugs straight into a 48-pin
backplane-mounted connector in the rack’s leftmost slot. It
provides +5 volt, +12 volt, and -12 volt power as well as logic
level sequencing signals to the backplane. The IC697PWR724 power
supply can be utilized in a single rack application. Additionally,
this PSA can deliver power to a second rack assuming the total load
is within the appropriate supply rating. Interconnection to the
second rack is by way of a prewired cable (part IC697CBL700). Power
supply output will ride through a 10 ms total loss of input power
at full load. Both overcurrent and overvoltage fault conditions are
protected.
This PSA module operates from a 24 VDC nominal line. The power
supply can accept an input voltage range of 18 to 32 VDC. For
operation at ambient temperatures that exceed 50 C (122 F), the
maximum output power must be derated. Please refer to the
installation manual for this and additional mounting and ground
instructions.
Moore News
NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main
methods for industrial production of alumina.
Most of the alumina produced is produced by Bayer process.
The Bayer-sintering hybrid method was first created, which greatly
improved the total recovery of alumina.
With the continuous improvement of production technology, some new
production methods such as lime Bayer method and beneficiation
Bayer method are continuously applied to production.
The integrated process control system is a distributed control
system.
The system consists of eight process control subsystems (workshop)
for raw material grinding, lime digestion, dissolution,
sedimentation, seed filtration, evaporation, product filtration,
and roasting.
Each workshop has an engineering station EWS and 2-3 operator
stations OPS.
The data collection, real-time monitoring, data processing and
other information transmission of the internal process parameters
of the workshop are realized by the EtherNet/IP control network.
The main production operations of the entire alumina plant are
completed by these eight subsystems, each controlled by a
ControlLogix controller.
More Products
| GE | IC697MDL940 | GE | IC200CPU001 |
| GE | IC693PWR330 | GE | IC200MDL750 |
| GE | IC693PWR321 | GE | IC200MDD844 |
| GE | IC693MDL940 | GE | VMICPCI-7326 |
| GE | IC697ALG230 | GE | IC695CPE310 |
| GE | IC695CPU310 | GE | PQMII-T20-C-A |
| GE | IC200ALG326 | GE | IC693CPU363 |
| GE | IC200MDL650 | GE | IC693CPU372 |
| GE | IC200ALG264 | GE | IC695CRU320 |
| GE | IC200PWR002 | GE | IC695NIU001 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
