IC693MDL930 GE Relay Output Module
⇒ Click here for good price IC693MDL930
| Brand/Manufacturer | GE /USA |
| Part Number | IC693MDL930 |
| Alternate Part Number | IC693MDL930 |
| Description | MOTOR SERVO |
| Dimennsions | 3.5x13x13.5cm |
| Weight | 0.42kg |
PRODUCT DETAILS
The GE Fanuc IC693MDL930 is a 4 Amp Isolated Relay Output module.
Designed for the Series 90-30 Programmable Logic Controller, this
module provides 8 normally-open relay circuits. These enable the
user to control output loads. Each circuit has a 4-amp output
switching capacity. Each output point on the module is isolated
from the other points and each point has a separate common power
output terminal.
The relay output module is able to control a variety of load
devices. This includes but is not limited to indicators, motor
starters and solenoids. To operate the field devices connected to
this module, the user needs to supply either AC or DC power. On the
top of the module there are two horizontal rows of green LEDs that
indicate the ON/OFF status of each point. There are eight LEDs in
each row. As the IC693MDL930 only has 8 relay circuits, the bottom
row is not used. The top row, which is labelled A1, indicates the
status of points 1 through 8.
There is an insert that sits between the inner surface and outer
surface of the hinged door on the module. On the outer left edge,
the insert is colored red. This indicates that it is a high-voltage
module. When the door is closed, the inner surface facing the
inside of the module has circuit wiring information. On the outside
surface, circuit identification information can be recorded. Users
who want to implement this module for their industrial applications
can do so with any Series 90-30 PLC system. The relay output module
may be installed in any I/O slot of either a 5-slot or 10-slot
baseplate.
Moore News
NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main
methods for industrial production of alumina.
Most of the alumina produced is produced by Bayer process.
The Bayer-sintering hybrid method was first created, which greatly
improved the total recovery of alumina.
With the continuous improvement of production technology, some new
production methods such as lime Bayer method and beneficiation
Bayer method are continuously applied to production.
The integrated process control system is a distributed control
system.
The system consists of eight process control subsystems (workshop)
for raw material grinding, lime digestion, dissolution,
sedimentation, seed filtration, evaporation, product filtration,
and roasting.
Each workshop has an engineering station EWS and 2-3 operator
stations OPS.
The data collection, real-time monitoring, data processing and
other information transmission of the internal process parameters
of the workshop are realized by the EtherNet/IP control network.
The main production operations of the entire alumina plant are
completed by these eight subsystems, each controlled by a
ControlLogix controller.
More Products
| GE | IC697MDL940 | GE | IC200CPU001 |
| GE | IC693PWR330 | GE | IC200MDL750 |
| GE | IC693PWR321 | GE | IC200MDD844 |
| GE | IC693MDL940 | GE | VMICPCI-7326 |
| GE | IC697ALG230 | GE | IC695CPE310 |
| GE | IC695CPU310 | GE | PQMII-T20-C-A |
| GE | IC200ALG326 | GE | IC693CPU363 |
| GE | IC200MDL650 | GE | IC693CPU372 |
| GE | IC200ALG264 | GE | IC695CRU320 |
| GE | IC200PWR002 | GE | IC695NIU001 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
