IC697CPX935 GE CPU, 96 MHz, 12K Discrete I/O, 1M byte fixed user
memory
⇒ Click here for good price IC697CPX935
| Brand/Manufacturer | GE /USA |
| Part Number | IC697CPX935 |
| Alternate Part Number | IC697CPX935 |
| Description | MOTOR SERVO |
| Dimennsions | 7x13.3x13.5cm |
| Weight | 0.52kg |
Product Details
The IC697CPX935 is a Single-Slot PLC CPU with three built-in serial
ports manufactured by GE Automation and Controls. It is capable of
performing real-time control of systems. Using VMEC.1 format, the
IC697CPX935 can communicate with different “smart option” modules
via a backplane mounted on the rack. This device is operated via a
three-position run/stop control switch or by a connection to a
computer running appropriate software.
A 96MHz microprocessor allows this device to perform floating point
calculations every 0.4 microseconds. Any mixture of 12K I/O and up
to 8K analog I/O is supported by this device. The IC697CPX935
supports the following modules: the entirety of the IC697 family of
discrete and analog I/O modules, programmable and alphanumeric
display coprocessors, IC660 and IC661 bus controller modules, link
and LAN interface modules, and communication modules.
One megabyte of on-board RAM memory is supported, which is
maintained by a IC697ACC701 battery. Flash memory (NVRAM) is also
supported with up to 256 kilobytes available for user data. System
firmware is stored in flash memory. Disassembling the device or
replacing the EPROM is not necessary for updating the firmware.
The IC697CPX935 is configured via a connected computer running
MS-DOS or software applications in Win 95 or Win NT. Connection to
this programmer computer is possible via a serial, parallel, or
Ethernet interface. No Dual Inline Package (DIP) switches or
jumpers are necessary. Operational settings are secured by a
software password on the programming computer or a memory protect
switch on the device itself.
To maintain a safe operational temperature in environments greater
than 50 Celsius or 122 Fahrenheit, this device will require
installation of a cooling fan with a minimum capability of 70 cubic
feet per minute.
Refer to the product manual for proper installation instructions.
Power to the rack should be off. Place the operational control
switch in the stop position. The memory protect switch should also
be off. The lithium battery may be inserted into either connector.
Connect the IC697CPX935 to the rack. Restore rack power.
Moore News
TO CONTACT YOUR ACCOUNT MANAGER QUICK QUOTE
Moore Automation has brought together a talented team of
professionals with decades of experience in high-tech distribution,
supply chain management, logistics, network technologies, and
customer care.
Not only we sell the products, but also provide a complete set of
pre-sale and post-sale
value-added services that enable our customers to maintain low cost
of technology ownership and achieve highest
return on investment during full technology products life cycle.
More Products
| GE | IC698ETM001 | GE | IC200MDL241 |
| GE | IC695ACC400 | GE | IC200CMM020 |
| GE | IC693NIU004 | GE | IS220PDOAH1B |
| GE | IC693MDL1231 | GE | IS200SRLYH2A IS200SRLYH2AAA |
| GE | IC693ACC307 | GE | IS220PAICH1B |
| GE | IC697BEM763 | GE | IC693MDL732 |
| GE | IC697CHS790 | GE | IS220PTURH1A |
| GE | IC693ACC302 | GE | IC697PWR710 |
| GE | VMIPCI-5565-110000 | GE | IC697MDL654 |
| GE | IC200MDL742 | GE | IC693ALG390 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
