IC693ALG391 GE Analog Output, Current, 2 Channels
⇒ Click here for good price IC693ALG391
| Brand/Manufacturer | GE /USA |
| Part Number | IC693ALG391 |
| Alternate Part Number | IC693ALG391 |
| Description | MOTOR SERVO |
| Dimennsions | 33.6x13x13.5cm |
| Weight | 0.35kg |
Product Details
IC693ALG391 is a 2-Channel Analog Current Output module for the
Series 90-30 Programmable Logic Controller. It offers two output
channels with each output having the ability to convert 12 bits of
binary (digital) data into an analog output for use as needed by
many applications. IC693ALG391 is able to give out outputs ranging
from 0 to 20 mA. The converted signal has a resolution of 12 bits
binary. However, the sign bit is not needed when converting the
output. During each scanning process, the two channels are updated.
The %AQ register has 13 essential bits that are changed to sign
magnitude by the PLC and forwarded to the module. The D/A converter
uses 12 of the bits while the thirteenth bit (sign) is utilized to
check whether negative data has been forwarded to the module.
If IC693ALG391 receives negative data, it outputs the low end of
the current range of 4 mA to 20 mA range. The software tends to
reject any value more than 32767 keyed in the modules. The
IC693ALG391 gives two output ranges that are 4 and 20 mA. These two
output ranges have user information laid down to make sure that a
count of 0 is equal to 4 mA and a count of 32000 is equal to 20 mA.
Every 1000 additions equal to 0.5 mA. In case the CPU is switched
to STOP mode or RESET, when measuring Current Output, 4 to 20 mA
Output, 0 to 20 mA the condition of the module changes to either
Default to 0/4MA or Hold-Last-State. Choosing the suitable
condition is created by arranging the DEF0/4 jumper on the
detachable terminal board connector on the module.
Every 2-Channel Analog Current Output can be utilized as a current
source/less accurate voltage source. A voltage is an output at
VOUTx which is equal to the current output. The voltage range
relies on the layout of the current output range and may be added
with the use of a 250-ohm resistor instead of voltage jumper. An
isolated +24 VDC power supplied by the PLC power supply is the
primary power source provider for IC693ALG391. There are two
terminals offered to the module's I/O terminal board for
user-supplied +24 volts. These terminals are important since they
offer a standby power supply to enable the outputs to retain their
value when the internal supply is lost and Hold-Last-State is
chosen.
Why Choose Moore?
The reason is simple. We offer the best value on quality industrial
equipment covered by industry leading buyer protection.
The Sales Team at amikon is constantly scanning the web to ensure
we are offering the lowest prices possible.
However, if you think we can do better, feel free to make an offer
on any of our products.
We pride ourselves on saving you money! Here is how to make an
offer.
The Offers Team does its best to respond to offers in a timely
manner. Typical turn-around time for an offer is 24 hours.
More Products
| BENTLY NEVADA | 3500/93 135799-01 | BENTLY NEVADA | 330180-90-05 |
| BENTLY NEVADA | 135813-01 | BENTLY NEVADA | 330130-045-01-CN |
| BENTLY NEVADA | 3500/15-04-04-00 | BENTLY NEVADA | 3500/44M |
| BENTLY NEVADA | 330130-040-02-00 | BENTLY NEVADA | TK81 |
| BENTLY NEVADA | 1900/65A-00-01-01-00-01 | BENTLY NEVADA | 330850-50-05 |
| BENTLY NEVADA | 330101-02-12-10-02-00 | BENTLY NEVADA | 330-180-91-05 |
| BENTLY NEVADA | 3300/53 3300/53-03-01-00-50-06-01-00-00 | BENTLY NEVADA | 136711-02 |
| BENTLY NEVADA | 3500/94 | BENTLY NEVADA | 330104-00-06-10-02-00 |
| BENTLY NEVADA | 330105-02-12-05-02-00 | BENTLY NEVADA | 125840-01 106M1081-01 |
| BENTLY NEVADA | 330105-02-12-05-02-CN | BENTLY NEVADA | 3500/15 133292-01 |
Contact Us
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng520
