OMRON CPM1A-10CDT-A-V1 PROGRAMMABLE CONTROLLER
| Brand/Manufacturer | OMRON / JAPAN |
| Part Number | CPM1A-10CDT-A-V1 |
| Alternate Part Number | CPM1A-10CDT-A-V1 |
| Description | PROGRAMMABLE CONTROLLER |
| Dimennsions | 15.5cm x 19.6cm x 9.8 cm |
| Weight | 1.2kg |
Product Details
One-piece Construction: The CPM1A CPU Units feature a one-piece
construction including 10, 20, 30, or 40 built-in I/O terminals.
The following three model groups are available: relay output
models, sinking transistor output models, and sourcing transistor
output models.
Extra I/O Capacity: Up to three Expansion I/O Units can be
connected to a CPM1A-30CD-(-V1)
or CPM1A-40CD-(-V1) CPU Unit to add an extra 8 or 20 I/O points for
each, for a maximum of up to 100 I/O points.
Input Filter Function: The CPM1A is equipped with a filter function
to prevent incorrect operation
caused by chatter or noise in the input signal. The user can select
an input time constant of 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64
ms, or 128 ms.
Low-maintenance Design: Flash memory provides memory backup without
a battery. Input Interrupts The CPM1A-10CD-(-V1) CPU Units can
handle 2 interrupt inputs; the CPM1A-20CD-(-V1), CPM1A-30CD-(-V1),
and CPM1A-40CD-(-V1) CPU Units can handle 4 interrupt inputs. In
addition to normal input interrupts, the CPM1A has a counter mode
that counts high-speed input signals and triggers interrupts at
fixed count multiples.
Quick-response Inputs: Quick-response inputs can detect input
signals with a pulse width as short as 0.2 ms regardless of their
timing during the PC cycle. Quick-response inputs and interrupt
inputs use the same input terminals.
Interval Timer: CPM1A PCs have a high-speed interval timer which
can be set from 0.5 ms to
319,968 ms. The timer can be set to trigger a single interrupt
(one-shot mode) or repeat scheduled interrupts (scheduled interrupt
mode).
High-speed Counter: CPM1A PCs have a high-speed counter that can be
used in incremental mode or up/down mode. The high-speed counter
can be combined with input interrupts to perform target value
control or zone comparison control that isn’t affected by the PC’s
cycle time.
Pulse Output Function: The CPM1A transistor output models have an
output function capable of outputting a pulse of 20 Hz to 2 kHz
(single-phase output).
Analog Setting Function: The CPM1A PCs have 2 analog volume
controls that can be used to make manual analog settings.
Moore News
NONFERROUS INDUSTRY
Non-ferrous Industry Capability
The sintering method and the Bayer process are currently the main
methods for industrial production of alumina. Most of the alumina
produced is produced by Bayer process.The Bayer-sintering hybrid
method was first created, which greatly improved the total recovery
of alumina.
With the continuous improvement of production technology, some new
production methods such as lime Bayer method and beneficiation
Bayer method are continuously applied to production.
The integrated process control system is a distributed control
system.
The system consists of eight process control subsystems (workshop)
for raw material grinding, lime digestion, dissolution,
sedimentation, seed filtration, evaporation, product filtration,
and roasting. Each workshop has an engineering station EWS and 2-3
operator stations OPS.
The data collection, real-time monitoring, data processing and
other information transmission of the internal process parameters
of the workshop are realized by the EtherNet/IP control network.
The main production operations of the entire alumina plant are
completed by these eight subsystems, each controlled by a
ControlLogix controller.
More Products
| SHNEIDER | 140DDO35310 | GE | 269PLUS-100P-120 |
| SHNEIDER | 140DDO36400 | GE | 531X111PSHAPG3 |
| SHNEIDER | 140NOE77110 | GE | 531X113PSFARG1 |
| SHNEIDER | 140NOE77111 | GE | 531X123PCHACG1 |
| SHNEIDER | 140NOM21200 | GE | 531X303MCPBCG1 |
| SIEMENS | 405-4DAC-1 | FOXBORO | FBM204 |
| SIEMENS | 405-4DAC-2 | FOXBORO | FCP270 |
| SIEMENS | 405-8ADC | FOXBORO | B0123HE |
| SIEMENS | 405-8ADC-1 | FOXBORO | CP30 |
| SIEMENS | 435-CPU | FOXBORO | CP30B |
Contact Us
miya@mvme.cn(Click)
Email: miya@mvme.cn
QQ: 2851195450
Tel: 86-18020776792
Skype: miyazheng52
