Miya(manager)
Email:miya@mvme.cn
Skype:miyazheng520
QQ :2851195450
Tel:0592-5087576
86-18020776792
1746-IO12
The 1746-IO12 is a digital I/O combination module with a
combination of 120V AC inputs and relay contact outputs. Input
operating voltage is 85...132V AC, and output operating voltage is
5...265V AC or 5...125V DC. 1746IO12 contains 6 inputs and 6
outputs. Input off-state current, max. of 2mA and continuous
current per output of 1.5A at 120V AC or 1.2A at 24V DC. Backplane
current load of 90mA at 5V DC or 70mA at 24V DC.
The strength and versatility of the Universal Remote I/O network
comes from the breadth of products it supports. In addition to 1746
I/O, the Universal Remote I/O network supports many AB and
third-party devices. Typical applications range from simple I/O
links with controllers and I/O, to links with a wide variety of
other types of devices. You connect devices through remote I/O
adapter modules or built-in remote I/O adapters. Using the
Universal RIO Network instead of direct-wiring a device over a long
distance to a local I/O chassis reduces installation, start-up, and
maintenance costs by placing the I/O closer to the sensors and
actuators. SLC 5/03, 5/04, and 5/05 processors support pass-thru
which lets you configure RIO devices remotely from an Ethernet,
DH+, or DH-485/DF1 network, as well as block transfer instructions
for faster reading and writing of I/O data.
Evaluate what communications need to occur. Knowing your
communications requirements will help you determine which processor
and which communications devices your application might require. An
SLC processor communicates across the 1746 backplane to 1746 I/O
modules in the same chassis in which the processor resides. Various
models of SLC processors have various on-board ports for
communication with other processors or computers. Also, separate
modules are available to provide additional communication ports for
communication with other processors, computers, and remotely
located I/O. Each processor has one or two built-in ports for
either EtherNet/IP, DH+, DH-485, or RS-232 (DF1, ASCII, or DH-485
protocol) communication. In addition to the on-board ports
available with SLC processors, you have the option of providing
another communication port for an SLC processor by adding a
communication module. Adapter modules for 1746 I/O are available
for ControlNet and Universal Remote I/O links. An I/O adapter
module in a chassis with I/O modules interfaces the I/O modules
with the I/O link for communication with a scanner port for a
processor at another location
Similar products
| AB | 1746-BTM |
| AB | 1746-ITV16 |
| AB | 1746-IC16 |
| AB | SP-151140 |
| AB | 917-0050 |
| AB | 917-0042 |
| AB | 1747-L514 |
| AB | 1771-NC15 |
| AB | 2711P-RC3 |
| AB | 1786-BNC |
| AB | 1756-L65 |
| AB | 1756-L63 |
| AB | 1756-L1M3 |
| AB | 1756-IM16I |
| AB | 1747-M11 |
| AB | 1756-L71 |
| AB | 1756-OB32 |
| AB | 1756-IB32 |
| AB | 1794-OE4 |
| AB | 1756-A4 |
| AB | 1791-16BC |
| AB | 1756SC-IF8H |
| AB | 1756-L55M12 |
| AB | 1756-IH16I |
| AB | 1756-IF6CIS |
| ABB | 3ADT314500R1001 SDCS-FEX-4 |
| ABB | IMDSI14 |
| ABB | 3ADT315100R1001 SDCS-POW-4 |
| ABB | AI845 3BSE023675R2 |
| ABB | 200-CICN 200-CIE |
| ABB | 3BHL000385P0101 5SHX0845F0001 3BHB003387R0101 5SXE05-0151 |
| ABB | NBIO-21CU |
| ABB | 07KT92 GJR5250500R0262 |
| ABB | NTAI06 |
| ABB | IEMMU11 |
| ABB | CI857K01 3BSE018144R1 |
| ABB | CI854AK01 3BSE030220R1 |
| ABB | SAFT185TBC SAFT 185 TBC 58119687 |
| ABB | SAMC19INF SAMC 19 INF 57401389 |
| ABB | FI830F 3BDH000032R1 |
| ABB | AI830 3BSE008518R1 |
| ABB | AI820 3BSE008544R1 |
| ABB | 3BSE000460R1 PFBO161 |
If you have any question pls do not hesitate to contact us.We can
supply all kind of the automaiton parts,if you want to purchase
parts pls send the parts model to my mail, I will prompt reply you
asa I receive the mail.Hope anyone enquire from us.
Miya(manager)
Email:miya@mvme.cn
Skype:miyazheng520
QQ :2851195450
Tel:0592-5087576
86-18020776792
