10332-12400 Adept 10332-12400 REV P4 Control Board Adept
10332-12400
Adept 10332-12400
Adept MV Controller Grounding
The detachable three-wire power cord is used for connection to the
power source and the protective ground. The protective ground
conductor (colored green/yellow) in the power cord is internally
connected to the exposed metal parts of the Adept MV Controller. To
ensure electrical-shock protection, the protective ground conductor
must be connected to a properly grounded power source.
Adept PA-4 Power Chassis Grounding The protective ground conductor
(colored green/yellow) of the Adept PA-4 Power Chassis is
internally connected to the accessible metal parts of the power
chassis. To ensure electrical-shock protection, this must be
connected to a properly grounded power source, via the Security
Panel.
The Adept PA-4 power chassis provides amplified power signals to
drive the robot motors in an Adept robot system. The amplifier
modules in the Adept PA-4 power chassis receive control signals
from the Adept MV controller. The amplifier modules then provide
the necessary current to drive the various robot joint motors. The
Adept PA-4 power chassis is shipped from the factory configured for
either 380-415 VAC or 200-240 VAC operation, depending on your
sales order. A voltage setting label is located on the front of the
chassis below the circuit breaker. The voltage setting is also
shown on the ID label on the side of the chassis. Verify that the
setting matches your facility power before installation. This
chassis is designed for 3-phase operation only
| Schneider | 140CRP31200 | GE | 104X109AD 109 2AG FUSE 1.5A,250V |
| Schneider | 140DAI55300 | GE | 104X125DC 014 DIODE MOD 1200-45A SKKD46/12 |
| Schneider | 140DAI74000 | GE | 237B8632G1 TRANSFORMER |
| Schneider | 140DDO35301 | GE | 246B1354G1 TRANSFORMER |
| Schneider | 140DDO35310 | GE | 246B8279G4 CPF MK5 CONTROL POWE |
| Schneider | 140DDO36400 | GE | 259A9266P16 FUSE(SLO-BLO)3.15A 5X20MM |
| Schneider | 140NOE77101 | GE | 278A2181VSP9 17"VIEWSONIC TABLE TOP |
| Schneider | 140NOE77110 | GE | 30ESK6 30A FILTERS |
| Schneider | 140NOE77111 | GE | 323A2357P1 FUSE(5A) |
| Schneider | 140NOM21100 | GE | 323A2357P21 FUSE(1.5A) |
| Schneider | 140NOM21200 | GE | 323A2357P4 FUSE (15A) |
| Schneider | 170ADO35000 | GE | 323A2396P155 FUSE 5A |
| Schneider | 170INT11003 | B&R | 3BP150.41 |
| Schneider | 416NHM30032 | B&R | 3PS754.9 |
| ABB | AO810 | B&R | 7BP704.0 |
| ABB | AO810V2 | B&R | 7AI774.70 |
| ABB | CI801 | B&R | 7DM465.7 |
| ABB | CI830 | B&R | 7CP474.60-1 |
Advantages of our products:
1.Improve efficiency
2.Optimize plant operations
3.emission reduction
4.Avoid unplanned downtime
5.Provides the lowest Total Cost of Ownership (TCO)
6.provides integrated control, power, safety,
and information solutions for complete plant-wide control in a
scalable,
7.open architecture to take advantage of traditional or renewable
sources of energy!
8.new and original
Payment:T/T 100% in Advance
Lead Time : 3-5 Days
Minimum Order Quantity : 1 Piece
Warranty : 1 Year
