ABB Module MPRC 086349-002 ABB MPRC086349002 ABB MPRC 086349002
MODULE NAOM New Sealed
Product Description:
Activate new operating mode by: calling up the menu item of ”Enable
PLC mode” in the ABB programming and test system or performing a
warm start performing a cold start or power OFF/ON.
Setting the cycle time see chapter B1 (Appendix), Processing times
Addressing when remote modules are connected see chapter B2
(Appendix), Addressing Back-up of data areas Back-up of data areas,
i.e. saving of data during power OFF/ON, is only feasible with
built-in battery. The following data can be backed, completely or
partly
Related Product Recommendation:
| 07KT97F1 | BSE003528R1 | 3BSE006085R1 |
| 07KT97C | 3BSE003529R1 | 3BSE003827R1 |
| 07KT97D | 3BSE004693R1 | 3BSE003829R1 |
| 07KT97B | 3BHT100018R1 | 3BSE001077R1 |
| 07KT97C | 3BSE003097R1 | 3BUC98002R0001 |
| 07KT97 | 3BSE006802R1 | 3BSE001440R1 |
| 07KT97B | 3BHT100010R1 | 3BHT300003R1 |
| 07KT97B | 3BSE010997R1 | 3BSE000756R1 |
| 07KT97B | 3BHT100010R1 | 3BSE011000R1 |
| 07KT97B | 3BUC910018R1 | 3BSE011002R1 |
| 07KT98E2 | 3BSE003390R1 | 3BHT300017R1 |
| 07MK92 | 3BSE003389R1 | 3BSE020520R1 |
| TC50 | 3BHT300019R1 | 3BSE013202A1 |
| ICFC16l1 | 3BSC760004R1 | 3BUR980009R1 |
| ICSF08D1 | 3BSC760009R1 | 3BSE000435R1 |
| ICSK20F1-120 | 3BSE003832R1 | 3BSE004773R1 |
| ICSK20F1-230 | 3BSE003816R1 | 3BSE055760R1 |
| ICSK20F1-24 | 3BSE006096R1 | 3BHT300012R1 |
| ICSK20N1 | 3BSE001552R1 | 3BHT00006R1 |
| ICSA04B5 | 3BSC610037R1 | 3BHT300007R1 |
| ICSE08B5 | 3BSE000863R0001 | 57120001-PS |
| 07KR31 | 3BUR000698R1 | 57120001-DP |
| 07DC92E | 3BUR000699R1 | 57120001-P |
| 07DC92F | 3BSC550038R3 | 5712001-HA |
| 07DC92B | 3BSE009616R1 3BSC | 3BSE007949R1 |
| 07AC91 | 492898801 | 57120001-HZ |
| 07DI92 | TK520V030 | 3BSE014162R1 |
Product's Character:
The following two terminals are reserved for the counter and cannot
be used for other purposes:
Terminal 2 (E62,00): Counting input Terminal 46 (A62,00): Output
”End value reached”
Enabling of the counting input and of the output ”End value
reached” is performed via the function block with EN=1 Access
within the PLC program is possible with CEs, see the documentation
of the programming software,the CEs are FCWR, FCRD, FCDEL.The
following three terminals are reserved for the counter and cannot
be used for other purposes:Terminal 2 (E62,00): Counting input
Terminal 3 (E62,01): Enable input Terminal 46 (A62,00): Output ”End
value reached”The enable input enables the counting input as well
as the output ”End value reached”.The counter is only enabled if
the enabling input
E 62,01 1 and at the function block the input 1.
LOT 2 NEW CUTLER HAMMER H1237 HEATER OVERLOAD ELEMENT D385152
LOT 5 NEW DSO FLUID HANDLING CD0-078-000 PUMP DIAPHRAGM BUNA-N 4IN
D390320
NEW LOT 2 MOLEX WMF-3901PRT MINI-FIT JR CONNECTOR 2 CIRCUIT PANEL
MOUNT B477722
LOT 5 NEW IDEAL 44-103 WIRE MARKER BOOKLET D513746
LOT 74 NEW SPIROLOX RS-125 RETAINING RING 34X30X1MM D312140
LOT 12 NEW NA A2-70 FS 5/8IN THICKNESS 1-1/2IN INDUSTRIAL SCREW
B236393
LOT 20 NEW SOLUS VALU GUIDE VG-292 4X2X3/4IN SPACER USED W/
VG-203/220 B377543
LOT 4 NEW HAF EQUIPMENT H-M10725 ALUMINUM BAG CUP D268691
LOT 10 NEW SCHMERSAL 0250-01-100 RUBBER SEAL 25X33X8MM D319416
LOT 2 NEW GATES ASSORTED B67 B69 BELT HI-POWER II D286657
LOT 80 NEW PANDUIT ASSORTED PN10-6F-L PV14-P47-C TERMINAL CONNECTOR
D339566
LOT 3 NEW HAMBA D25M-DB9F ELECTRICAL WIRE ASSEMBLY D330206
NEW TWIN CITY 2-7/16 BAF 245 1450RPM 115V-AC 9W 9-3/4IN OD FAN
ASSEMBLY D475612
NEW CATERPILLAR CAT 1A-1415 2-3/4X1-7/8-THR?EAD LOCKNUT ENGINE
MACHINE B495204
NEW H&H MACHINE 414743 BRAKE CORE SHAFT ASSEMBLY D411352
NEW A325 BH 1-1/4-7 X6-1/4IN HEX CAP SCREW 7IN TOTAL LENGTH BOLT
D412829
NEW WEILER 08274 ST-3 3IN X 0.020IN X 1/2-3/8IN WIRE WHEEL D481244
LOT 5 NEW INTRALOX E1B8 CAM ROLLER D417186
The use of the product:
1.automobile manufacturing,
2.glass industry,
3.construction machinery,
Product's advantages:
1.Improve efficiency
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
Our advantages:
1.We keep more than 10 thousands Transistors in warehouse, it could
cut lead time of most items.
2.365 days warranty for all the goods from us.
3.2000+ suppliers with us, we could help you to get any components
which is difficult to get.
Frequently Asked Questions:
1. Q:How long warranty does Moore can provide ?
A: Moore can provide 1 year warranty !
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem,
please contact with us,we'll provide suggestion from our engineer
to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in
warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
