ABB Module ECZ FPR3700001R0001 ABB ECZ FPR3700001R0001 ECZ Unbenutzt OVP Reasonable price

Product Description:

In this operating mode, an up/down counter with an edge-triggered set input is available. Edge-triggered
means that the set function is effective only on the signal edge and not during the time the signal is high.
The following two terminals are reserved for the counters and cannot be used for other purposes:
Terminal 2 (E62,00): Counting input Terminal 3 (E62,01): Edge-triggered set input The edge-triggered set input is in effect on the rising edge at terminal 3.The signal ”End value reached” can only be read from the function block, not via a terminal. Note: It is not intended to change the counting direction (with
U/D) while the counter is running. When U/D is changed, this forces that the counter is set to its start
value. After that, the counter starts counting in the new direction.

Related Product Recommendation:

Product's Character:

In order to safe the user program in the SmartMedia Card(SMC Card), a brand new SMC Card is required or another one which has never been initialized as a user data memory. Sequence of program saving Load PLC user program into the PLC (RAM) While power is ON, insert the SMC Card
Activate monitor command "SP".The user program is now copied from the PLC's RAM to its Flash EPROM and then loaded into the SMC Card. An update of the 07 KT 94's operating system (firmware)
is not possible with the SMC Card.The high-speed counter used in the basic unit 07 KT 94
works independently of the user program and is therefore able to response quickly to external signals. It can be used in seven different and configurable operating modes. The desired operating mode is set in the system constant KW 85,02 (described later). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used.

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.