ABB Module DSTX120 57160001-MA ABB DSTX120 57160001-MA DSTX 120 ONE USED High quality

Product Description:

Enabling of the counting signals:The counting signals must be enabled. This is done depending on the operating mode either via a terminal or with the input EN (Enable) of the function block. Setting the counter to a start value: The counter can be set to a start value. This value must be present at the input STA (Start value) of the function block. Using the set signal (dependent on the operating mode either via a terminal or with the SET input of the function block) the value of the word variable at STA is written into the counter. Note: If the SET and EN signals are present during several processing cycles, the processor sets the counter every program end crossing anew. During the rest of the processing cycle the counter counts pulses.

Related Product Recommendation:

Product's Character:

In order to safe the user program in the SmartMedia Card(SMC Card), a brand new SMC Card is required or another one which has never been initialized as a user data memory. Sequence of program saving Load PLC user program into the PLC (RAM) While power is ON, insert the SMC Card
Activate monitor command "SP".The user program is now copied from the PLC's RAM to its Flash EPROM and then loaded into the SMC Card. An update of the 07 KT 94's operating system (firmware)
is not possible with the SMC Card.The high-speed counter used in the basic unit 07 KT 94
works independently of the user program and is therefore able to response quickly to external signals. It can be used in seven different and configurable operating modes. The desired operating mode is set in the system constant KW 85,02 (described later). The configured operating mode is only activated during initialization (power-on, cold start, warm start). For all operating modes, the same function block COUNTW is used.

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.