ABB Module DSQC668 3HAC029157-001 ABB DSQC668 3HAC029157-001 DSQC
668 Computer Board reputation based
Product Description:
The limit voltage of the varistor is ca. 36 V. This means,that if
UP5 = 24 V, the input signal voltage must be between -12 V and +30
V. If UP5 = 30 V, the input voltage has to be within -6 V and +30
V.If all of the 8 channels of the group are used as inputs,and if
in addition the UP5 terminal is left unconnected,
no restrictions exist for the inputs. The input signal voltages
then may be within -30 V and +30 V.
There is no restriction for the input/output group concerning its
safety against reversed polarity. and by error flags of the PLC
then.The error could have been caused by overload, shortcircuit or
missing supply voltage UP5/ZP5.The technical specifications are the
same as with the other digital inputs and outputs.The technical
specifications of the inputs are the same with the other digital
inputs, but with the following exception:Caused by the direct
electrical connection with the output, the varistor for
demagnetization of inductive loads (see figure above) is also in
effect at the input.Therefore, the voltage difference between UP5
and the input signal must not be greater than the limit voltage of
the varistor.
Related Product Recommendation:
| CMA121 3DDE300401 | 3ASC25H705/7 | C1900/0263/0260A C1900/0263 |
| CMA132 3DDE300412 | 3ASU21C110 LU6278 DCU30/7 | C1900/0363 C1900/0363/0360A |
| CS300E PAC 031-1053-00 | 3AUA489002B4562 | C300/0010/STD |
| CS513 3BSE000435R1 | 3BHE022291R0101 PCD230A | CI520V1 3BSE012869R1 |
| D0910S | 3BHE023784R2530 PP D113 | CI522 3BSE012790R1 |
| DAI01 | 3BHE024577R0101 PP C907 BE | CI522A 3BSE018283R1 |
| DAI04 | 3BSE001245R1 3BSC640008R1 | CI526 3BSE006085R1 |
| DAO01 | 3BSE003879R1 | CI531 3BSE003825R1 |
| DAPC100 3ASC25H203 | 3BSE011316R1 SDCS-PIN-52 | CI532V01 3BSE003826R1 |
| DAPC100 3ASC25H203 | 3HAC14550-4 | CI532V02 3BSE003827R1 |
| DAPU100 3ASC25H204 | 3HAC14551-2 | CI532V02 3BSE003827R1 |
| DATX110 3ASC25H209 | 3HAC17484-8 | CI532V04 3BSE003829R1 |
| DATX130 3ASC25H214 | 3HAC17484-9 | CI540 3BSE001077R1 |
| DATX132 3ASC25H216 | 3HNE00313-1 | CI570 3BSE001440R1 |
| DCF503-0050 | 3HNM09846-1 | CI590 3BHT340092R1 |
| DCP02 P-37211-4-0369654 | 3HNP04014-1 | CI615 3BHT300024R1 |
| CMA112 3DDE300013 | 424K1105 | CI626A 3BSE005023R1 |
| CMA114 3DDE300013 | 6638910B1 638910B1PS0084 | CI630 3BSE011000R1 |
| AI830A 3BSE040662R1 | 7944831D | CI830 |
| 07MK92 GJR5253300R1161 | 89AR30 | CI854AK01 3BSE030220R1 |
| 07NG61R1 GJV3074311R1 | A8PU05ABFW02 | CI857K01 3BSE018144R1 |
| 07NG63R1 GJV3074313R1 | AI610 3BHT300000R1 | CI860 CI860K01 3BSE032444R1 |
| 07PS62R2 GJV3074332R2 | AI625 3BHT300036R1 | CM30/000S0E0/STD |
| 07SK90R1 GJR5250200R0001 | AI630 3BHT300011R1 | CMA112 3DDE300013 |
| 07ZE61R302 GJV3074321R302 | AI810 3BSE008516R1 | CMA114 3DDE300013 |
| 07ZE63R302 GJV3074323R302 | AI830A 3BSE040662R1 | CMA121 3DDE300401 |
| 086363-002 OSPS2 | AV31 AV 31 | CMA132 3DDE300412 |
Product's Character:
Features of the analog inputs: The 8 analog inputs are not
electrically isolated.The resolution of the A/D converter is 12
bits.Analog signals are conducted in shielded cables (seeFig. 4-5).
The analog inputs can be configured individually in a lot of
different operating modes (even as digital inputs).The
configuration is performed by setting certain bits in the system
constants KW 86,00 to KW 86,07 as follows: Acknowledgement of error
messages in the basic unit.The outputs are safe against reverse
polarity and forced supply of 24 V DC.Use of the digital output
signal at the terminal 46 (A 62,00) for the high-speed counter The
output A 62,00 can be assigned to the internal highspeed counter by
configuration. If the counter is used in the operating modes 1 or 2
(up-counter), the output A 62,00 is only available for the counter.
The use of the product:
1.electronics manufacturing,
2.automobile manufacturing,
3.tobacco,
Product's advantages:
1.Provides the lowest Total Cost of Ownership (TCO
2.emission reduction
3.Avoid unplanned downtime
Our advantages:
1.emission reduction
2.Optimize plant operations
3.emission reduction
Frequently Asked Questions:
1. Q: Do you provide warranty for the goods?
A: Yes, we provide warranty for all the goods from us.
2. Q: Could Moore provide technology support?
A: We're in this field more than 12 years. If there's any problem,
please contact with us,we'll provide suggestion from our engineer
to help you solve problem.
3. Q: Does Moore keeps goods in stock or only trading?
A: We have large warehouse for goods. Keep lots of goods in
warehouse, so could promise fast delivery.
Send your Inquiry details in the Below, Click "Send" Now!
Contact Information:
Contact:Miya ( manager)
Email :sales@mooreplc.com
Q Q: 2851195450
Skype: miyazheng520
Mobile:86-18020776792 ( what's app )
