Allen Bradley Modules 1784-PM16SE 1784 PM16SE AB 1784PM16SE POWER MODULE Super quality products

Product Description:

Bulletin 1305 drive parameter data can be programmed and displayed using PLC’s, SLC’s or other logic controllers using an optional Bulletin 1203 Communication Module. The amount of information that can be transferred between the drive and controller is determined by the DIP switch settings on theCommunication Module. Table B.1 illustrates the dip switch settings for Bulletin 1203-GD1 (Remote I/O) communication modules. Dip switch settings for other communication modules will be similar. Refer
to the appropriate communication module user manual for details.Important: 1305 drives with firmware revisions FRN1.01 and FRN1.02 are not compatible with Bulletin 1203 Communication Modules. If connected, an error message will be indicated. The red fault status and amber SCANport status LED’s on the front of the module will flash simultaneously.

Related Product Recommendation:

Product's Character:

Manual, gives an overall description of the Bulletin 1305 Adjustable Frequency AC Drive (herein called “the drive”) and provides a listing of key drive options. Additionally, this chapter provides information on receiving and handling the drive. MANUAL OBJECTIVES The purpose of this manual is to provide
the user with the necessary information to install, program, start up and maintain the Bulletin 1305 drive. To assure successful installation and operation, the material presented must be thoroughly read and
understood before proceeding. Particular attention must be directed to the ATTENTION and Important statements contained within. Chapter 2 provides instructions on how to mount and wire the drive. It also describes how to operate the drive without a Human Interface Module. Read the Motor Cable Length
section on pages 2-13 – 2-16, and the contact closure inputs information in the Control Terminal Block descriptions on pages 2-19 – 2-21. Chapter 3 defines the display and control panel keys on the optional Human Interface Module. A flowchart is provided to guide the user through the key strokes of the various
menu levels.

1746-ITB16 Fast Response DC Sinking Input Module AB
1746-ITV16 Fast Response DC Sourcing Input Module AB
1746-IV16 Current Sourcing DC Input Module AB
1746-IV32 Current Sourcing DC Input Module AB
1746-IV8 Current Sourcing DC Input Module AB
1746-N2 Card Slot Filler AB
1746-NI16I High Resolution Analog Input Module - Current AB
1746-NI16V High Resolution Analog Input Module - Voltage AB
1746-NI4 High Resolution Analog Input Module AB
1746-NI8 High Resolution Analog Input Module AB
1746-NIO4I High Resolution Analog Input/Output Module AB
1746-NIO4V High Resolution Analog Input/Output Module AB
1746-NO4I Analog Current Output Module AB
1746-NO4V Analog Voltage Output Module AB
1746-NO8I Analog Current Output Module AB
1746-NO8V Analog Voltage Output Module AB
1746-NR4 RTD Input Module AB
1746-NR8 RTD Input Module AB
1746-NT4 Thermocouple Input Module AB
1746-NT8 Thermocouple Input Module AB
1746-OA16 120/240V AC Output Module AB
1746-OA8 120/240V AC Output Module AB

1746-OAP12 High Current 120/240V AC Output Module AB
1746-OB16 Current Sourcing DC Output Module AB
1746-OB16E Isolated Sourcing DC Output Module AB
1746-OB32 Current Sourcing DC Output Module AB
1746-OB32E Isolated Sourcing DC Output Module AB

Yaskawa CLSR-0420-N2CD-1 RF Linear Motor Controller 4S587-688-1 NSR-S205C works

CMC AM422670P000 Motion Controller Aximate/C AMAT SEMVision cX used working

Yaskawa 4S586-959-6 Linear Motor Controller CLSR 0420-N2CB-1 Nikon NSR used

Yaskawa 4S586-959-5 Linear Motor Controller CLSR 0420-N2CB Nikon NSR used works

Nikon SPA355C RF Linear Motor Controller 4S588-087 Nikon NSR-S307E used working

Sumitomo M28512 ADE1 V Control Unit 4S587-280-2 Nikon NSR Series used working

Nikon 4S588-087 RF Linear Motor Controller SPA355B Nikon NSR-S307E used working

Nikon SPA454D MSCR Linear Motor Controller 4S588-065-1 Nikon NSR-S307E works

Nikon SPA454A MSCL Linear Motor Controller 4S587-471-2 Nikon NSR-S307E works

Nikon 4S586-950-4 Linear Motor Controller SPA432B Nikon NSR-S205C used working

Nikon 4S586-949-4 Linear Motor Controller SPA432A Nikon NSR-S205C used working

Sumitomo ADE1 H Control Unit 4S587-598 M28557 Nikon NSR-S205C used working

Nikon 4S587-468-2 WX Linear Motor Controller SPA451A Nikon NSR-S307E used works

Sumitomo M28511 ADE1 H Control Unit 4S587-245-2 Nikon NSR Series used working

Nikon 4S588-064 MSCL Linear Motor Controller SPA454C Nikon NSR-S307E used works

Nikon 4S587-470-3 Linear Motor Controller SPA452B Nikon NSR-S307E Wafer Loader

Nikon 4S587-472-2 Linear Motor Controller SPA454B Nikon NSR-S307E used working

Nikon 4S587-241 WX Linear Motor Controller SPA431B Nikon NSR-S205C used working

Nikon 4S588-085 IHS Linear Motor Controller SPA256B Nikon NSR-S307E Wafer Loader

Sumitomo ADE1 H Control Unit 4S587-598 M28557 Nikon NSR-S307E used working

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.