Allen Bradley Modules 1756-EN2T 1756EN2T AB 1756 EN2T ControlLogix ENet supply to worldwide

Product Description:

The ground conductor of the motor cable should be connected to the drive ground (GRD) terminal directly. Connecting this ground conductor to a cabinet ground point or ground bus bar may cause high frequency current to circulate in the ground system of the enclosure. The motor end of this ground
conductor must be solidly connected to the motor case ground. Shielded or armored cable may be used to guard against radiated emissions from the motor cable. The shield or armor should be connected to the drive ground terminal and the motor ground as outlined in the Grounding section of this Installation
chapter. Common mode chokes are recommended at the drive output to reduce the common mode noise. An RFI filter can be used and in most situations provides an effective reduction of RFI emissions that may be conducted into the main supplylines. If the installation combines a drive with sensitive devices or circuits,it is recommended that the lowest possible drive PWM frequency be programmed.

Related Product Recommendation:

Product's Character:

When the drive mounted HIM is supplied, it will be connected as Adapter 1 (see Adapter in Chapter 2) and visible from the front of the drive. The HIM can be divided into two sections; Display Panel and Control Panel. The Display Panel provides a means of programming the drive and viewing the various
operating parameters. The Control Panel allows different drive functions to be controlled. Refer to Figure and the sections that follow for a description of the panels.Important: The operation of some HIM functions will depend upon drive parameter settings. The default parameter values allow full HIM
functionality.HIM OPERATION When power is first applied to the drive, the HIM will cycle through a series of displays. These displays will show drive name, HIM ID number and communication status. Upon
completion, the Status Display will be shown. This display shows the current status of the drive (i.e. “Stopped,”“Running,” etc.) or any faults that may be present (“Serial Fault,” etc.). If the HIM software is Series A version3.00

1769-OB16 Digital Output Module AB
1769-OF2 Analog Current/ Voltage Output AB
1770-P1 Power Supply AB
1770-SC Station Connector AB
1770XYC AB PLC 5 Battery AB
1771-0B Digital Output Module AB
1771-A2B Allen Bradley Racks AB
1771-A3B 12 Slot I/O Chassis AB
1771-A4B 16 Slot I/O Chassis AB
1771-AD I/O Chassis - 16 Slot AB
1771-AL PLC 2 I/O Adaptor Module AB
1771-ALX PLC5 Local I/O Adapter Module AB
1771-ASB Remote I/O Adapter Module AB
1771-ASC Remote I/O Adapter Module AB
1771-CE Power Supply Cable AB
1771-CFM Configurable Flowmeter Module AB
1771-CK I/O Chassis Power Cable AB
1771-CP1 I/O Chassis Cable AB
1771-CP2 I/O Chassis Cable AB
1771-CPI I/O Chassis Power Cable AB
1771-CR PLC-2 Processor Cable AB
1771-DA ASCII I/O AB
1771-DB Basic Module AB
1771-DC Real-Time Clock Module AB
1771-DCM 1771-DCM B Direct Communication Module AB
1771-DS Digital Input Module AB
1771-DW Digital Input Module AB
1771-E1C Analog Input Expander AB
1771-ES Servo Encoder Feedback Expander Module AB
1771-HM3A IMC-123 64 KW CMOS Memory Module AB

1771-HS3A IMC-123 IMC-123 3-Axis Servo AB
1771-IA Digital Input Module AB
1771-IA2 AC/DC Input Module AB
1771-IAD Digital Input Module AB
1771-IAN Digital Input Module AB
1771-IB Digital Input Module AB

The use of the product:

Moore Automation is a company specializing in the sales of modules and spare parts for world-renowned brands (DCs systems, robot systems, large servo control systems). The company's products include: distributed control systems (DCS), programmable controllers (PLC), MOTOROLA -MVME industrial modules, industrial control communication converters (Anybus), remote output/input modules (RTU), industrial computers (PC), industrial low-frequency screens (IPC), human-machine interface SCSI (50, 68, 80Pin ) AnyBus(Gateway)o The spare parts we sell provide one-year quality guarantee and have undergone strict testing and certification. Now we have become a global sales enterprise of industrial automation spare parts and components.