FAQ

Q1: What is the typical measurement range of this transducer?

A: According to the datasheet, this assembly (with typical configuration) has a linear range of about 0.25 mm to 2.3 mm (10 mils to 90 mils)

when the probe is gapped at its midpoint. The Incremental Scale Factor (ISF) is about 7.87 V/mm (200 mV/mil) ±5%.

Note: The actual linear range and output may vary slightly depending on exact variant,

wiring length, and installation conditions.

Q2: What are the environmental and mechanical ratings?

A: The PROXPAC XL housing is rated to IP66 / Type 4X, suitable for wet, dusty, industrial conditions.
The housing material is PPS (Polyphenylene Sulfide) reinforced for strength and ESD mitigation.
It’s not designed for significant internal or external pressure loads unless specified; for

high-pressure applications check with Bently Nevada.

Q3: Can I use standard extension cables with this assembly?

A:One of the key features of the PROXPAC XL is that it eliminates the need for a separate extension cable between

the probe and Proximitor sensor, because that is integrated in the housing. However, you will

still need field wiring from the transducer assembly to the monitoring system.

This wiring must respect the specification for maximum

length (~305 m) and proper shield/grounding.

Moore Automation are still working and able to shipping worldwide.

Our company has many products in stock,which are immediately available.The warranty is 1 years which apply to all the new products.If you purchase one more parts from us,we can make a discount to you.

If you have any questions, please feel free to contact us. We can supply various automation parts. If you want to buy parts, please send the part model to my email and I will reply to you immediately after receiving it.

Hope anyone enquire from us.

We have tens of thousands of spare parts and spare parts warehouse . Products and services to serve for installing of users control system.

Distributed control systems, programmable controllers, panel controller and drive!

* Our mission is to help you!
* Reduced maintenance costs!

We have a large inventory of control system components. We also made a lot of new hardware and discontinued spare parts to help

supporting your existing control systems.

We have experienced staff, extensive testing , all the spare parts which we sold are with warranty period of one year, and they have

undergone rigorous testing and certification!